KOMATSU
-
EC290B/EC290BLC/EC290 TRACK ROLLER/BOTTOM ROLLER/LOWER ROLLER
The track roller is composed of shell,collar,shaft,seal,O-ring,bushing bronze,plug,lock pin,single flange track roller and double flange track roller is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavator of CATERPILLAR、KOMATSU、HITACHI、KOBELCO、YANMAR、KUBOTA、HYUNDAI etc;the design of double-cone sealing and lubrications for life makes the track roller long life and perfect performance under any working condition;hot forging roller shell gains distinguishing inner material fiber flow distribution architecture;differential-type hardening and through-type hardening assure the depth under heat treating and the crack controlling.
The function of the track roller is to convey the weight of excavator to the ground.
When excavator is run on uneven ground,track rollers carry a tremendous impact.
Therefore,the support of track rollers is huge.Moreover,if it is of poor quality and is often dusty,it needs a very good sealing to prevent dirt,sand,and water from damaging it.
Our products are according to the standard of OEM to manufacture.
-
EC210 High quality track roller#Bottom roller#Lower roller/Track bottom roller
The track roller is composed of shell,collar,shaft,seal,O-ring,bushing bronze,plug,lock pin,single flange track roller and double flange track roller is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavator of CATERPILLAR、KOMATSU、HITACHI、KOBELCO、YANMAR、KUBOTA、HYUNDAI etc;the design of double-cone sealing and lubrications for life makes the track roller long life and perfect performance under any working condition;hot forging roller shell gains distinguishing inner material fiber flow distribution architecture;differential-type hardening and through-type hardening assure the depth under heat treating and the crack controlling.
The function of the track roller is to convey the weight of excavator to the ground.
When excavator is run on uneven ground,track rollers carry a tremendous impact.
Therefore,the support of track rollers is huge.Moreover,if it is of poor quality and is often dusty,it needs a very good sealing to prevent dirt,sand,and water from damaging it.
Our products are according to the standard of OEM to manufacture.
-
1175045 CAT320 E320 1175046 CAT325 E325 Friction welding track roller#Track Roller#Bottom Roller
The track roller is composed of shell,collar,shaft,seal,O-ring,bushing bronze,plug,lock pin.
the function of the track roller is to convey the weight of excavator to the ground.
When excavator is run on uneven ground,track rollers carry a tremendous impact.
Therefore,the support of track rollers is huge.Moreover,if it is of poor quality and is often dusty,it needs a very good sealing to prevent dirt,sand,and water from damaging it.
With high quality hardness ware-resisting alloy chrom&molybdenum floating seal and elastic rubber O ring,deep hardnedd wear surface,good quality bronze bushings,steel shaft made by round steel or forging,well lubricated oil recycle system,our products are according to the standard of OEM to manufacture.
-
E306E#TRACK ROLLER#BOTTOM ROLLER#Mini excavator parts#CATERPILLAR
Model：E306E
Brand: KTS
Machine:Mini Hydraulic Excavator
Be suitable for : CATERPILLAR machine
Material: 50Mn/40MnB
Finish: Smooth
Surface Hardness：HRC52-58
Hardness depth: 8-12mm
Install size: 160MM
Technique: Forging,Casting,Maching,Heat Treatment
Warranty: 12months
Supply ability: 2000pcs/per month
Color: Black or Yellow
Place of origin: China
Port: Xiamen port
After warranty service: video technical support; online support
Delivery time: 0-30days
Package: Standard export wooden pallet
-
E303/E303.5/E55/CAT305.5 TRACK ROLLER#BOTTOM ROLLER#MINI EXCAVATOR PARTS#CATERPILLAR undercarriage parts
This track roller is used for mini excavator of HITACHI and KOMATSU ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks,our products are according to the standard of OEM to manufacture.
-
C50R Crawler Carriers Parts#Bottom Roller#Track roller#Crawler Carriers#Carriers
YANMAR excavators have 2 series of models“VIO” and“SV”,have ranging from 0.8t-10t class excavators,YANMAR track carriers have model as blew:C08、C12R-C、C30R、C50R,our factory can supply undercarriage parts like track roller,sprocket,top toller.idler for those model,otherwise,we also can produce products according to customers requirement.
-
C30R#C20R#C25R# TRACK ROLLER#BOTTOM ROLLER#LOWER ROLLER#crawler carriers parts
The roller material is round steel,it’s suitable for C30R crawler carriers,beside,YANMAR have others tracked carriers like C08、C12R-C、C50R.
What model undercarriage parts of YANMAR excavators we have done?
YANMAR excavators have ranging from 0.8t-10t class excavators,have 2 series of models,“VIO” and“SV”,have steel tracks and rubber tracks,our factory have done many mini excavator undercarriage parts like track roller,carrier roller,sprocket,idler,track link assy,track shoe assembly etc,those parts can be used in VIO12,VIO17,VIO20,VIO25,VIO30,VIO35,VIO50,VIO55,VIO80,VIO80,
SV08,SV100 excavators,more informations,pls contact us without hesitate.
Our products are according to the standard of OEM to manufacture.
-
BOBCAT322/BOBCAT337/X334/BOBCAT337/BOBCAT430/BOBCAT442/T170/T190 TRACK ROLLER#SPROCKET#IDLER
This track roller is used for mini excavator of BOBCAT ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
-
ZX200-5G Idler/Forging idler/Idler manufacturer/Great Idler
The idler is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking.
The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation.
-
ZAX48U idler#Mini excavator idler#Front idler#Idler
Our factory produce mini-excavator undercarriage parts for many years,special 1T-6T mini excavator parts,track roller have single flang and double flange,idler shell have forging kind and casting kind,the roller have bearing type and oil seal kind type,have steel tracks and rubber tracks.
The idler is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking.
The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation.
-
VIO15-2/VIO16/VIO17/VIO18 idler#Idler for rubber track#Idler for steel track#Mini excavator parts
Our factory produce mini-excavator undercarriage parts for many years,special 1T-6T mini excavator parts,idler shell have forging kind and casting kind,the roller have bearing type and oil seal kind type,have steel tracks and rubber tracks.
The idler is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking.
The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation.
-
U15-3/U10/KX41-3/KH025/KH030/KH040 idler#Mini excavator idler#Front idler
Our factory produce mini-excavator undercarriage parts for many years,special 1T-6T mini excavator parts,track roller have single flang and double flange,idler shell have forging kind and casting kind,the roller have bearing type and oil seal kind type,have steel tracks and rubber tracks.
The idler is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking.
The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation.